Residential · Port St. Lucie, FL
Metallic epoxy flooring delivers a deep, 3D sheen that looks like polished stone but performs like an industrial coating. Elite Epoxy Port St. Lucie installs and repairs metallic systems with tight surface prep, clean edges, and a clear topcoat built for real traffic in Port St. Lucie.
Prep is what makes metallic epoxy flooring last. We start with moisture checks and identify contaminants like oil, silicone, curing compounds, and old sealers, then diamond-grind concrete with HEPA dust control to hit the right concrete surface profile (typically CSP 2-3 for coatings). Cracks and spalls get routed, cleaned, and filled with a fast-setting epoxy repair mortar, and we re-check flatness so metallic movement looks intentional, not blotchy. Next comes an epoxy primer and a tinted base coat that locks in adhesion and gives the metallic pigments an even canvas.
Florida slabs can hold moisture, and that matters for any resin floor. When conditions call for it, we use a moisture-mitigating epoxy primer and control application timing around temperature and humidity so the metallic “mottle” develops evenly without fisheyes or amine blush. The metallic layer is installed at the right film build and manipulated with spiked shoes, squeegees, and rollers to create the pattern you want, from subtle marble to high-contrast movement. We finish with a clear, chemical-resistant urethane or polyaspartic topcoat in your chosen gloss level, plus optional anti-slip media like aluminum oxide or polymer grit for wet areas.
Port St. Lucie customers choose us because the work is built around process, not shortcuts. We serve since 2016, and we stay focused on the details that make metallic epoxy flooring look high-end, straight cuts at walls and doorways, clean transitions at thresholds, consistent color control, and a topcoat schedule that matches how the space is actually used. You get clear options for build thickness, traction, and maintenance, with straightforward expectations on cure times and when you can return to service.
Before we start, we walk the slab with you, confirm color direction, lighting, and sample expectations, then document repairs and coating steps in a written scope. After install, we do a final walkthrough to check sheen consistency, edges, and traction, and we leave you with care instructions, recommended cleaners (pH-neutral), and guidance for furniture pads and rolling loads. If you need metallic epoxy flooring repair, we’ll evaluate whether a re-topcoat, blend repair, or full resurface is the right fix, then price it accordingly. The result is a floor that photographs well, cleans fast, and holds up to daily use.
Yes. We provide a free written estimate after an on-site look at the concrete condition, prep needs, and the coating system you want.
Yes. We are licensed and insured for epoxy flooring and concrete coating work, and we can provide documentation upon request.
Common systems include epoxy primer and 100% solids epoxy basecoats, full flake broadcasts, metallic epoxy, and UV-stable polyaspartic or aliphatic polyurethane topcoats. We also install traction additives and cove base options when needed.
Yes. We route and fill cracks, repair spalls and pitting with patch materials, and rebuild damaged areas as part of the prep so the coating lays flat and bonds correctly.
Hot-tire pickup is usually caused by improper prep, weak materials, or under-cured coatings. A properly ground slab, quality epoxy base, and a durable topcoat greatly reduce the risk.
Metallic epoxy flooring is a multi-layer resin system that creates depth and movement using reflective metallic pigments suspended in clear epoxy. It is popular for garages, home gyms, showrooms, offices, salons, lobbies, and retail because it delivers a custom look with a seamless, chemical-resistant surface. Elite Epoxy Port St. Lucie installs new metallic floors and repairs failed coatings with proper prep, moisture control, and durable clear topcoats designed for Florida conditions.
A quality metallic epoxy floor starts with the slab. We remove weak or glossy surfaces by diamond grinding and repair cracks, pits, and spalls so they do not telegraph through the finish. After prep, we apply an epoxy primer and a pigmented base coat that sets the background tone and helps the metallic pigments develop evenly. This step is critical for color control and for preventing blotches caused by uneven absorption or contamination.
For the metallic layer, we mix the pigments into the epoxy and place the material at the correct thickness, then manipulate it with rollers and squeegees to create the look you choose. Because lighting changes how metallic epoxy reads, we talk through room lighting, window exposure, and desired contrast before install. Once the metallic layer cures, we protect it with a clear topcoat, usually urethane or polyaspartic, selected for your needs such as scratch resistance, chemical exposure, UV stability, and cleaning routine.
If your current floor is peeling, bubbling, or dull, metallic epoxy flooring repair begins with diagnosis. Moisture vapor, improper prep, and incompatible coatings are common causes of failures, and the fix depends on what is underneath. In many cases we can re-topcoat after proper abrasion, while severe delamination requires grinding back to sound concrete and rebuilding the system. You will receive a free written estimate with a clear scope so you can choose the right path for performance and budget.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Port St. Lucie. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
